BSME and BSCE students can use this guide to study Engineering Statics: Open and Interactive by Daniel W. Baker (Colorado State University) and William Haynes (Massachusetts Maritime Academy). It is a complete textbook for Engineering Mechanics: Statics, the first course in the mechanics series: vectors, forces and moments, equilibrium of particles and rigid bodies, trusses, frames and machines, centroids and distributed loads, internal forces and beam diagrams, friction, and moments of inertia.
What sets it apart is how it teaches problem solving. The book opens with a seven-step method, makes the free-body diagram the first step of every equilibrium problem, and shows four different ways to find shear and bending moment diagrams so you can pick the one that fits. The online edition adds interactive GeoGebra figures and randomized practice problems; this PDF keeps the full text, figures and over a hundred worked examples, with QR codes that link to the interactives. For BSME and BSCE students heading into Dynamics and Mechanics of Materials, Chapters 8 and 10 are written as stepping stones for exactly those courses.
Book Overview
| Course | Engineering Mechanics: Statics — the first course in the Engineering Mechanics series |
| Degree Programs | BS Mechanical Engineering (BSME), BS Civil Engineering (BSCE) |
| Level | University — builds on calculus and introductory physics |
| Edition | PDF dated September 26, 2026 — first released Fall 2020 and still updated by its authors and users |
| Author | Daniel W. Baker (Colorado State University) and William Haynes (Massachusetts Maritime Academy), with a team of contributing authors from US universities and colleges |
| Structure | 10 chapters plus 4 appendices (421-page PDF) |
| Exercises | Over 100 worked examples in the text; the end-of-chapter exercises are randomized online problems that appear in the PDF only as blank pages |
| Language | English |
| License | Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0); the GeoGebra content is CC BY-NC-SA 3.0 — Model: Link-only |
| Format | Free searchable PDF (non-interactive, with QR codes to the interactives) and a free interactive online edition |
Chapter List
Chapter 1: Introduction to Statics
Difficulty: Easy · Key topics: translation and rotation, Newton’s three laws, SI and British Gravitational units, pound-force versus pound-mass, weight and mass, types of forces, free-body diagrams, problem-solving steps
The book opens by calling statics the gateway to engineering mechanics: the study of particles and rigid bodies in equilibrium, usually at rest. It reviews Newton’s three laws and shows how, for bodies that are not accelerating, the second law collapses into ΣF = 0 and ΣM = 0. A long units section compares the SI, British Gravitational and English Engineering systems and settles the pound-force versus pound-mass confusion with W = mg. The chapter then names the kinds of forces (point, distributed, body, reaction, interaction and internal) and ends with a seven-step routine for equilibrium problems built around the free-body diagram.
Key Points:
- Statics only deals with bodies that are not accelerating, so Newton’s second law becomes
ΣF = 0for translation andΣM = 0for rotation. - Newton’s third law says forces come in equal-and-opposite pairs acting on different bodies; a free-body diagram isolates one body so those pairs stay visible.
- SI uses newtons and kilograms; the British Gravitational system uses pounds-force and slugs. In Statics, a “pound” always means pound-force.
W = mgconverts between weight and mass: a 100 kg object weighs 981 N, and a 100 lb object has a mass of about 3.1 slug.- Forces are named by role: point (concentrated), distributed, body (weight, buoyancy), loads, reactions, interaction forces and internal forces.
- Every equilibrium problem follows the same path: understand, list givens and unknowns, choose a strategy, draw the free-body diagram, write equations, count equations against unknowns, then check units, size and sign.
Memory Tip: Keep two unit pairs in your head: SI is newton and kilogram, US customary is pound (always a force) and slug. If a number of pounds is given, it is already a force, so you only need W = mg when you want the mass.
Common Mistake: Treating a weight given in pounds as a mass and multiplying by g again, or mixing g = 9.81 m/s² into a problem written in feet and pounds.
Important Questions:
- When a Statics problem gives a value in pounds, is it pound-force or pound-mass? Pound-force. In Statics all pounds are forces; mass in the US system is in slugs and comes from
W = mg. - What does Newton’s second law reduce to for a body in static equilibrium?
ΣF = 0andΣM = 0, because both the linear and the angular acceleration are zero.
Chapter 2: Forces and Other Vectors
Difficulty: Medium · Key topics: scalars and vectors, line of action, rectangular and polar coordinates, direction cosine angles, spherical and cylindrical coordinates, unit vectors, vector addition, dot product, cross product
This chapter builds the vector toolkit the rest of the book depends on. After defining scalars, vectors, magnitude, line of action, orientation and sense, it works through one-dimensional vectors, two-dimensional rectangular and polar coordinates, and three-dimensional systems with direction cosine angles plus spherical and cylindrical coordinates. Unit vectors let you build a force along any line from two points on it. Vector addition is taught four ways: the triangle rule, graphical, trigonometric and algebraic addition of components. The chapter closes with the dot product for magnitudes, angles and projections, and the cross product for the rotational tendency of forces.
Key Points:
- A vector has magnitude and direction; its magnitude is never negative, but a scalar component carries a sign.
- A force can slide along its line of action without changing its effect, while moment vectors are free vectors with no point of application.
- Direction cosines are the cosines of the angles a vector makes with the positive
x,yandzaxes, and they equal the components of the unit vector along it. - To build a force along a line
AB, divide the displacement vector by its length to get a unit vector, then multiply by the force magnitude. - The resultant of any number of vectors is found by adding the scalar components in each direction:
R = ΣFx i + ΣFy j + ΣFz k. - The dot product
A · B = |A||B| cos θis a scalar and is zero for perpendicular vectors; the cross product has magnitude|A||B| sin θ, follows the right-hand rule and changes sign if the order is reversed.
Memory Tip: Dot gives a number (how much of one vector lies along the other, so it uses cosine). Cross gives a new vector (the turning direction, so it uses sine).
Common Mistake: Trusting the calculator’s inverse tangent for vectors in the second or third quadrant. It only returns angles from the first and fourth, so you must add or subtract 180 degrees, which is why the book recommends working with acute angles and applying the signs by hand.
Important Questions:
- What does it mean when the dot product of two vectors is zero? The vectors are perpendicular, because
cos 90° = 0. - Is the vector cross product commutative? No. Reversing the order reverses the direction:
A × B = -(B × A).
Chapter 3: Equilibrium of Particles
Difficulty: Medium · Key topics: rigid body, equilibrium, particle and concurrent forces, free-body diagram, two-force body, tension and compression, force triangle, scalar components method, multi-particle systems, 3D particles
Equilibrium starts with the simplest case: a particle, meaning a body whose forces all pass through one point, so only ΣF = 0 applies. The chapter first defines bodies, rigid bodies and equilibrium, then solves one-dimensional problems with space diagrams and free-body diagrams, and introduces two-force bodies such as ropes, struts and springs. Two-dimensional problems are attacked three ways: the force triangle, trigonometry with the laws of sines and cosines, and scalar components. It then links several particles through their equal-and-opposite interaction forces and finishes with three-dimensional particles using direction angles and unit vectors.
Key Points:
- A particle is defined by concurrent (or coincident) forces, not by small size, so it never experiences a turning effect and only
ΣF = 0is needed. - In 2D the force equation gives two scalar equations, so at most two unknowns; in 3D it gives three, so at most three unknowns.
- A two-force body carries equal, opposite, collinear forces: forces pointing toward each other mean compression, pointing apart mean tension.
- Ropes and cables are modelled as inextensible and in tension only, with their own weight ignored unless the problem gives it.
- The force triangle closes three concurrent forces in equilibrium into a triangle; a hand-drawn one gives only about two significant digits, so confirm with another method.
- For several connected particles, the force shared between two of them is equal and opposite on their separate free-body diagrams; start with the particle that has the fewest unknowns.
Practice Tip: Before writing any equation, count: equations available (two in 2D, three in 3D) against unknowns. If the numbers do not match, you have missed a force or you need another free-body diagram.
Common Mistake: Putting the wrong forces on the free-body diagram, such as the pull a rope exerts on the ceiling instead of the pull the rope exerts on the particle. Only forces acting on the isolated body belong on its diagram.
Important Questions:
- Why can a 2D particle problem have at most two unknowns? Concurrent forces leave only
ΣFx = 0andΣFy = 0, so two independent equations are available. - What is a two-force body? A body acted on by exactly two forces; they must be equal, opposite and along the line joining their points of application.
Chapter 4: Moments and Static Equivalence
Difficulty: Hard · Key topics: moment of a force, moment arm, right-hand rule, Varignon’s theorem, cross-product moments in 3D, moment about a line, couples, equivalent transformations, resultant force and moment, wrench
A force can push a body along and also turn it; this chapter is about the turning tendency, the moment. It defines the moment as force times perpendicular distance, gives its direction by the right-hand rule, and adds moments in 2D using scalar components and Varignon’s theorem. In 3D the moment becomes the cross product r × F, extended to a moment about a line with a triple scalar product. Couples are introduced as pure moments. The last sections show how forces can be slid or moved with a couple, and how any load system reduces to a resultant force and moment, a wrench, or a simpler equivalent.
Key Points:
- The magnitude of a moment is
M = F d, wheredis the perpendicular distance from the point to the line of action; units are force times length. - In 3D,
M = r × Fwithrrunning from the moment center to any point on the line of action, and the order matters: neverF × r. - Varignon’s theorem: the moment of a force equals the sum of the moments of its components, which often avoids finding the perpendicular distance.
- The moment about a line is the component of the moment about a point on that line, found by dotting it with the line’s unit vector (a triple scalar product).
- A couple is two equal, opposite, parallel forces; it causes rotation only, and its moment is the same about every point, so it is a free vector.
- Two loadings are statically equivalent when their resultant force and their resultant moment about the same point are equal; moving a force off its line needs an added couple equal to force times the shift.
Memory Tip: Push a door at the hinge and nothing turns. A force whose line of action passes through the moment center has zero moment arm, so it contributes zero moment.
Common Mistake: Using the straight-line distance from the point to where the force is applied instead of the perpendicular distance to the force’s line of action.
Important Questions:
- Why does a couple’s position on a body not matter? The moment of a couple is the same about every point, so it is a free vector and can be placed anywhere without changing the external effect.
- When are two loading systems statically equivalent? When they have the same resultant force and the same resultant moment about a common point.
Chapter 5: Rigid Body Equilibrium
Difficulty: Hard · Key topics: degrees of freedom, free-body diagrams, support reactions, available and engaged reactions, 2D and 3D equilibrium equations, choosing moment points, stability, determinacy
This chapter combines forces and moments to solve a single rigid body. It starts with degrees of freedom and restraint, then spends a long section on free-body diagrams: a five-step drawing method and tables of the reactions that 2D and 3D supports provide, including the idea that a reaction can be available but not engaged. The equations of equilibrium follow, with advice on choosing efficient moment points and solving one-unknown equations first, then the 3D case worked with vectors and linear algebra. The chapter closes with stability and determinacy: when a body is properly held, and when statics alone cannot find the reactions.
Key Points:
- A rigid body has 3 degrees of freedom in 2D (two translations and one rotation) and 6 in 3D, which gives 3 or 6 independent equilibrium equations.
- Every equilibrium problem begins with a free-body diagram: isolate the body, add an axis system, all applied loads including weight, and the reactions where supports were removed.
- A support supplies a reaction force for each translation it blocks and a couple-moment for each rotation it blocks, so a roller, a pin and a fixed support supply different sets.
- Reaction forces engage before reaction couple-moments: a reaction can be available without being engaged, like a slack cable or a couple that is not needed.
- To keep the algebra short, sum moments about a point where unknown forces cross, and solve the equations that contain only one unknown first.
- A body must be both stable (properly restrained, which depends on the reactions and not on the loads) and determinate (unknowns equal the independent equations) to be solvable by statics.
Practice Tip: Solve one 2D problem twice, first with moments about one support, then about a different point. Both must give the same reactions, and the comparison shows which choice produced simpler equations.
Common Mistake: Drawing a reaction couple at a pin or roller, which cannot resist rotation, or leaving one out at a fixed support, which can.
Important Questions:
- How many independent equilibrium equations does a rigid body have in 2D and in 3D? Three in 2D (two force, one moment) and six in 3D (three force, three moment).
- Does a body’s stability depend on the external loads? No. Stability depends only on how many reactions there are and how they are arranged.
Chapter 6: Equilibrium of Structures
Difficulty: Hard · Key topics: trusses, frames and machines, two-force members, simple trusses, zero-force members, method of joints, method of sections, interaction forces, load paths
Real structures contain many connected bodies, so this chapter shows how to take them apart. It sorts structures into trusses, frames and machines, and treats the forces between connected members as equal-and-opposite pairs. For trusses it explains simple trusses built from triangles, the joint-and-member count, the danger of relying on a single load path, and two rules for spotting zero-force members. The method of joints and the method of sections then find member forces. Frames and machines are solved by disassembly into free-body diagrams, and a closing summary compares every equilibrium case seen so far.
Key Points:
- A truss is built entirely from two-force members joined by pins and loaded only at the joints, so each member carries pure tension or compression along its axis.
- A simple truss is made of triangles and satisfies
2j = m + 3, wherejis the number of joints andmthe number of members. - Method of joints: every planar joint gives
ΣFx = 0andΣFy = 0, so start where only two members have unknown forces and carry the results to the next joint. - Zero-force members: two non-collinear members at an unloaded joint are both zero-force; if three forces meet at a joint and two are collinear, the third is zero-force.
- Method of sections: cut the truss so no more than three unknown members are exposed, then use the three equilibrium equations on either piece.
- Frames and machines contain multi-force members and must be disassembled; the force between two parts appears equal and opposite on their diagrams, and a two-force member gives only one useful equation.
Memory Tip: A joint behaves like a particle (forces only, two equations). A section or a frame member behaves like a rigid body (forces and moments, three equations).
Common Mistake: Treating a member as zero-force for every load. A member can be zero-force under one loading and carry load under another, and misreading the rules can remove members that do carry force.
Important Questions:
- How many unknown members should a section cut through? No more than three, since the exposed piece gives only three equilibrium equations in 2D.
- How does a frame differ from a machine? A frame is stationary and designed to support loads; a machine has moving parts and usually multiplies force.
Chapter 7: Centroids and Centers of Gravity
Difficulty: Medium · Key topics: weighted average, center of gravity, center of mass, centroid, composite parts, first moment of area, integration with strips, distributed loads, fluid pressure
The chapter begins with weighted averages and uses them to define the center of gravity, center of mass and centroid as one idea with different weighting factors. Centroids of composite shapes are found with a table of areas and coordinates, subtracting holes and extending to composite solids. A short section on the average value of a function links the calculus to the idea, and Section 7.7 finds centroids by integration with strips and double integrals, including the general spandrel. Two practical jobs follow: replacing distributed loads with an equivalent point force, and fluid statics, where pressure grows with depth and loads walls, windows and gates.
Key Points:
- Center of gravity, center of mass and centroid all use the same weighted-average formula; only the weighting factor changes (weight, mass, volume or area).
- A centroid lies on any axis of symmetry of the shape.
- Composite method:
x̄ = Σ(Ai x̄i) / ΣAifrom a table of parts, with holes entered as negative areas and every distance measured from one common origin. - By integration, the first moments are
Qx = ∫ ȳel dAandQy = ∫ x̄el dA, and the centroid follows asx̄ = Qy / Aandȳ = Qx / A. - A distributed load is replaced by one force equal to the area under the load curve, acting through the centroid of that area.
- Fluid pressure increases linearly with depth,
P = ρgh, so the resultant on a submerged surface acts through the centroid of the pressure distribution.
Memory Tip: For composite shapes, keep one table with the columns area, x̄, ȳ, A·x̄, A·ȳ. Add the last three columns, divide, and you are done.
Common Mistake: Measuring the parts’ centroid distances from different origins, or forgetting to subtract a cut-out instead of adding it.
Important Questions:
- How do you find the equivalent force of a distributed load? Its magnitude is the area under the load function, and it acts through the centroid of that area.
- How does fluid pressure change with depth? It increases linearly,
P = ρgh, so the loading on a vertical wall is triangular.
Chapter 8: Internal Forces
Difficulty: Hard · Key topics: axial force, shear force, bending moment, sign conventions, section cut at a point, shear and moment diagrams, load-shear-moment relationships, graphical method, integration method
Internal forces are the forces and moments inside a body that hold it together under load. The chapter shows how an imaginary cut exposes an axial force, a shear force and a bending moment, and sets the sign convention used for all beam work. It then covers four ways to find them: equilibrium at a single point, section cuts at a variable position x to get shear and moment functions, a graphical method built on the load-shear-moment relationships, and an integration method for arbitrary loads written as piecewise functions. GeoGebra interactives and a summary comparing the four methods close the chapter.
Key Points:
- In a 2D body an imaginary cut exposes three internal loadings, normal (axial) force, shear force and bending moment, which the three equilibrium equations then solve.
- Internal forces come in pairs, so the usual up-is-positive rule fails; positive shear pushes down on the face seen from the right and up on the face seen from the left, positive normal force stretches, and positive bending moment curves the beam upward.
dV/dx = w(x)anddM/dx = V(x), taking upward loads as positive: the slope of the shear diagram is the load and the slope of the moment diagram is the shear.- The change in shear between two points equals the area under the load curve, and the change in moment equals the area under the shear curve.
- A concentrated force makes the shear diagram jump, a concentrated moment makes the moment diagram jump, and the moment is largest where the shear crosses zero.
- If you prefer loads positive downward, replace
w(x)with-w(x)in the relationships.
Memory Tip: Load, integrate, shear, integrate, moment. Going the other way you differentiate: the slope of each diagram is the one above it.
Common Mistake: Reading a shear force as simply “up” or “down” without saying which side of the cut you are looking at, or using the equilibrium sign convention for internal forces.
Important Questions:
- How are shear force and bending moment related along a beam? The slope of the moment diagram equals the shear at that point, and the change in moment over a segment equals the area under the shear diagram.
- What internal loadings exist in a 2D rigid body? Axial (normal) force, shear force and bending moment.
Chapter 9: Friction
Difficulty: Hard · Key topics: Coulomb friction, impending motion, friction angle, slipping versus tipping, wedges, square-thread screws, flexible belts, journal bearings, disc friction
Friction is introduced as dry (Coulomb) friction: the tangential force that resists sliding, limited by the coefficient of static friction and the normal force. The chapter explains impending motion, the friction angle and the friction resultant, and how to decide whether a body will slip or tip. It then applies friction to machine elements: wedges, square-thread screws (including when a screw is self-locking), flexible belts and pulleys with tension ratios and torque transmission, journal bearings and the friction circle, and disc friction in collar bearings, end bearings and circular-arc disc brakes.
Key Points:
- Static friction satisfies
F ≤ μs N; the equalityF = μs Nholds only when motion is impending. Once sliding, kinetic friction isF = μk N, andμkis usually smaller. - The friction angle
φsis the angle between the normal force and the resultant of normal and friction forces at impending motion, withtan φs = μs. - For a body on a rough surface, check both slipping and tipping; whichever needs the smaller applied force happens first.
- In wedge problems the normal force is perpendicular to each contact surface and friction is parallel to it, and the forces on the wedge and block are equal-and-opposite pairs.
- A screw is a wedge wrapped around a cylinder; it is self-locking when the friction angle is larger than the thread angle, so it holds a load without turning back.
- In a flexible belt over a pulley, friction opposes the impending slip and the larger tension acts in the direction of the belt’s impending motion; the tension ratio grows exponentially with the friction coefficient and the contact angle.
- In a journal bearing the contact point shifts as the shaft turns, and the resultant force is tangent to the friction circle of radius
r sin φs.
Memory Tip: Friction is a limit, not a fixed value. It takes whatever value equilibrium needs, up to μs N, and only at that limit is the formula F = μs N allowed.
Common Mistake: Using F = μs N when the body is merely at rest and nothing says it is about to slip. In that case friction comes from equilibrium and is only checked against μs N.
Important Questions:
- When can you use
F = μs N? Only at impending motion. Otherwise, findFfrom equilibrium and confirm thatF ≤ μs N. - Which side of a belt carries the larger tension? The side toward which the belt is about to move relative to the pulley, because friction opposes that motion.
Chapter 10: Moments of Inertia
Difficulty: Medium · Key topics: first moment of area, area moment of inertia, differential strips, parallel axis theorem, composite shapes, polar moment, radius of gyration, product of inertia, mass moment of inertia
Moments of inertia measure how an area is spread around an axis, which governs the stiffness and strength of beams, shafts and columns. The chapter defines area, first moment, moment of inertia, polar moment and product of inertia as integrals, then works out the moment of inertia of a rectangle, triangle, differential strip and circle (using polar coordinates and symmetry). The parallel axis theorem moves results to any axis, and composite shapes handle built-up sections and cut-outs. Radius of gyration and product of inertia complete the set, and a short closing section points ahead to mass moment of inertia in Dynamics.
Key Points:
- The area moment of inertia is
Ix = ∫ y² dA; the squared distance makes every element add (none cancel), and the units are length to the fourth power. - For a rectangle,
Ix = bh³/12about its centroidal axis andbh³/3about its base. - Parallel axis theorem:
I = Ī + A d², whereĪis about the centroidal axis parallel to the new one anddis the distance between the axes. - For composite shapes, take each part’s centroidal value plus
A d²about the common axis and add them; holes are subtracted. - The polar moment is
J = Ix + Iy, and it governs the shear stress in a twisted circular shaft. - The radius of gyration is
k = √(I / A), which also satisfiesko² = kx² + ky², and is used to judge column buckling. - The product of inertia
Ixy = ∫ xy dAcan be positive, negative or zero; it is zero when an axis is a symmetry axis, and principal axes are the rotated axes where it vanishes.
Memory Tip: Think distance squared. Material far from the axis counts the most, which is why beams put their material at the top and bottom edges.
Common Mistake: Applying the parallel axis theorem between two non-centroidal axes. One of the two axes must pass through the centroid, so go through the centroid first.
Important Questions:
- What is the parallel axis theorem?
I = Ī + A d²: the moment of inertia about any axis equals the centroidal value plus the area times the square of the distance between the two parallel axes. - How are the polar and rectangular moments of inertia related?
J = Ix + Iy, which follows fromr² = x² + y².
Appendices A-D: Notation, Math Review and Property Tables
Appendix · Difficulty: Easy · Key topics: vector notation, distance formula, right-triangle trigonometry, law of sines, law of cosines, centroids of common shapes, moments of inertia of common shapes, steel section properties
Four short appendices support the main chapters. Appendix A explains the book’s notation for vectors, magnitudes, components and unit vectors. Appendix B reviews the distance formula, right-triangle trigonometry and oblique triangles with the laws of sines and cosines. Appendix C tabulates the centroids and moments of inertia of common shapes. Appendix D lists section properties of structural steel angles, channels, standard sections and wide-flange beams in both US and SI units, which are handy for composite-section problems.
Key Points:
- Vectors are written in bold (or with an arrow by hand), magnitudes in plain italics, and
⟨Fx, Fy⟩and(F; θ)are two ways to write a vector’s components or magnitude and direction. - The unit vectors along the axes are
i,jandk, and a hat marks a unit vector in a given direction. - Use the law of cosines when you know two sides and the included angle (SAS) or all three sides; use the law of sines otherwise.
- Keep the calculator in degrees mode, and work with acute angles and positive inverse-trig arguments, applying signs afterward.
- Appendix C gives centroids and moments of inertia of common shapes so you do not have to re-derive them, and Appendix D gives weight per foot, area, dimensions, centroid and
Ivalues for standard steel sections.
Common Mistake: Ignoring the ambiguous SSA case of the law of sines, where two different angles share the same sine, so there may be two valid triangles or only one that is physically possible.
Important Questions:
- When should you use the law of cosines rather than the law of sines? When two sides and the included angle (SAS) or all three sides are known; in other cases use the law of sines.
- Why is the SSA case ambiguous? Two angles between 0 and 180 degrees have the same sine, so you may get two solutions, or one that must be discarded as physically impossible.
How to Study This Book
Read Chapters 1 to 5 in order, because each one is used by everything after it: vectors (Chapter 2) feed particle equilibrium (Chapter 3), vectors and moments (Chapter 4) feed rigid body equilibrium (Chapter 5), and Chapters 6, 8 and 9 all solve their problems with the free-body diagrams and equations of Chapter 5. The book itself warns that your course may skip topics or change the order, so follow your instructor’s sequence once you are past Chapter 5.
Do not skip Chapter 2 just because it overlaps with Calculus III. Sections 2.5 (unit vectors from two points), 2.7 (dot products and projections) and 2.8 (cross products) are used repeatedly, and Section 1.4 is worth reading on day one because it lays out the seven-step problem-solving routine the whole book follows.
In Chapter 4, the 2D material (Sections 4.1 to 4.3, then couples and equivalent systems in 4.5 to 4.7) is enough for a mainly planar course. Section 4.4, with 3D moments and moments about a line, is the hardest reading in the first half; return to it before Section 5.5 on 3D rigid body equilibrium. Chapter 5 is the centre of the book, so give extra time to the support-reaction tables in Section 5.2 and to Section 5.6 on stability and determinacy.
For Chapter 6, learn trusses first (Sections 6.3 to 6.5: zero-force members, method of joints, method of sections) and treat frames and machines (Section 6.6) as a separate skill that needs patient free-body diagrams. The summary in Section 6.7 is a good one-page revision sheet for the whole equilibrium half of the course.
Chapter 7 splits into two parts. Sections 7.1 to 7.5 (weighted averages, composite parts) need only algebra, while Sections 7.6 and 7.7 (integration) need calculus. Read Section 7.8 on distributed loads before Chapter 8, because shear and bending moment problems depend on it. Section 7.9 on fluid statics may not be in your syllabus. In Chapter 8, read Sections 8.1 to 8.3 first, then pick the diagram method your instructor teaches (8.6, 8.7 or 8.8) and use Section 8.10 to compare them. Chapter 9 depends mainly on Chapter 5, and Chapter 10 can be read at any time after Chapter 7.
What this book does not cover: it is a statics text only, so there is no dynamics (kinematics or kinetics), and mass moment of inertia gets only a short pointer in Section 10.8. The contents list has no sections on virtual work or on cables carrying distributed loads; if your syllabus includes them, add a second source.
One honest warning about this PDF: the end-of-chapter Exercises sections (2.9, 3.6, 4.8, 5.8, 6.8, 7.10, 8.11, 9.8 and 10.9) are randomized online problems, so they appear in the PDF only as empty pages. To practise, use the worked examples in the text, which number over a hundred, and the interactive figures and exercises in the online edition at the official site.
Used In These Programs
This book is used for the Engineering Mechanics: Statics course in: BS Mechanical Engineering · BS Civil Engineering. Browse all Statics books or all Engineering books.
Who Should Read This
This book suits BSME and BSCE students taking their first Engineering Mechanics: Statics course, and it works equally well for students in other engineering programmes that include statics, such as aerospace, industrial or mechatronics. It is also a good self-study text if you want to refresh statics before Dynamics or Mechanics of Materials, since Chapter 8 (internal forces) and Chapter 10 (moments of inertia) are written as stepping stones to the second. It assumes college algebra, trigonometry and some calculus, and a student who is shaky on Newtonian mechanics can first read the mechanics chapters of University Physics Volume 1. It is not the right choice if your course is mostly dynamics, or if your syllabus requires virtual work or cable analysis, which the book does not include. For engineering entry tests the vectors, forces and moments chapters give useful background, but the book is written for a university statics course and not as a test-prep guide.
Applicable Universities
This book is useful for students at Pakistani universities offering BS Mechanical Engineering and BS Civil Engineering programmes, including UET Lahore, NUST, NED University, COMSATS, GIKI, and other HEC-recognized, PEC-accredited institutions.
Official Copy of Engineering Statics
This book is free from its official site. Click below to open the official Engineering Statics page, where you can download the free PDF for offline reading or printing, or read the online edition with its interactive figures and randomized practice problems.
→ Visit Official PageFAQs
Is Engineering Statics: Open and Interactive free?
Yes. The book’s own About page states it is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International licence (CC BY-NC-SA 4.0). You may download, use and print it, and adapt it for non-commercial use as long as you credit the authors and share your changes under the same licence. The GeoGebra content in the book is licensed separately under CC BY-NC-SA 3.0.
Which edition is this, and is it current?
The PDF on this page is dated September 26, 2026. The book was first released to the public in Fall 2020 and its authors keep updating it with corrections and suggestions from teachers and students, so it is a live, maintained book. Check the official site for the newest build.
Does the PDF include the interactive figures and the exercises?
Not fully. The PDF is the non-interactive version: the figures are static and QR codes link to the interactive versions online. The end-of-chapter exercises are randomized Numbas problems that exist only in the online edition, so the PDF’s Exercises sections are empty. The text itself still has over 100 worked examples.
How many chapters does it have?
Ten chapters plus four appendices in a 421-page PDF: Introduction to Statics, Forces and Other Vectors, Equilibrium of Particles, Moments and Static Equivalence, Rigid Body Equilibrium, Equilibrium of Structures, Centroids and Centers of Gravity, Internal Forces, Friction, and Moments of Inertia. The appendices cover notation, a maths review, shape properties and steel section tables.
Is it good for complete beginners?
It starts from the basics of vectors and units and explains each step, but it assumes algebra and trigonometry from the start and uses calculus in Chapter 7 (centroids by integration), Section 8.8 and Chapter 10. Appendix B is a quick refresher on trigonometry. Chapters 1 to 6 rely mainly on algebra, trigonometry and vector maths, so the calculus is concentrated in the later chapters.
Does it cover trusses, beams and friction, and what is left out?
Yes, all three: Chapter 6 covers trusses (method of joints and method of sections), frames and machines, Chapter 8 covers shear and bending moment diagrams by four methods, and Chapter 9 covers dry friction with wedges, screws, belts, bearings and discs. It does not cover dynamics, virtual work or cables carrying distributed loads.
Related Books
- University Physics Volume 1 – OpenStax
- College Physics 2e – OpenStax
- Calculus Volume 1 – Strang & Herman (OpenStax)
- Calculus Volume 3 – Strang & Herman (OpenStax)
Engineering Statics: Open and Interactive is a free, complete statics textbook for BSME and BSCE students, with a clear problem-solving method, many worked examples and an online edition full of interactive diagrams. Browse more Engineering books and Physics books for the rest of your semester.
Engineering Statics: Open and Interactive, by Daniel W. Baker (Colorado State University) and William Haynes (Massachusetts Maritime Academy), with contributing authors. Free under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International licence (GeoGebra content CC BY-NC-SA 3.0). Official source: https://engineeringstatics.org
© Copyright Policy
Freebooks.pk is an educational resource for students in Pakistan. Textbooks and other books belong to their respective boards, authors and publishers, and all rights remain with them. If you are the copyright holder of any material on this page and want it changed or removed, please contact us or file a request under our DMCA policy. We review every request and remove reported content promptly.
